Search results

To meet the high stiffness requirement of bearings used in high-precision spindles, this paper aims to propose a novel kind of bearing composited by hydrostatic cavities and tilting pads with preload.

Cavities are cut on the oil seal surface of a hybrid bearing, in which the tilting pads are set up. The load of the bearing is carried by the hydrostatic cavities and tilting pads. The structural features of this compound bearing and the controlling variables of the main stiffness coefficient are presented. Two basic design principles are proposed on the basis of equal machining clearance (EMC) and equal installation clearance (EIC).

The theoretical analysis indicates that the stiffness of compound bearings under the EMC condition increases to infinity monotonously when the preload coefficient of the tilting pad tends to 1, while the stiffness under the EIC condition has a peak value. Therefore, a synthetic design principle is proposed by synthetically using the above-mentioned two principles. The applicable range of the three principles is discussed through an example.

The study about technological combination of hydrostatic cavity and tilting pad in this paper can provide suggestions for the design of a high-stiffness bearing in a precision spindle.

High power and speed are new demands for rotating machinery which needs the journal bearings with high dynamic characteristics. The critical speed of the rotor-bearing system is one of the most significant parameters to evaluate the dynamic characteristics. This paper aims to investigate the theoretical and experimental analysis of a rotor system supported by large diameter elliptical bearings.

To obtain the theoretical and experimental support for rotor-bearing system design, dynamic characteristics theoretical analysis based on the finite difference method is given and an experiment focuses on critical speed identification is carried out.

The theoretical calculation results indicate that the critical speed is near to 800 rpm and there is no large vibration amplitude round working speed (1,500 rpm). Using the test bench in the factory unit, vibration data including three experimental processes are obtained. According to the vibration data, the critical speed is identified which also indicates that it is stable when working at 1,500 rpm.

The design method for the rotor system supported by large diameter elliptical bearing can be obtained by the theoretical and experimental results shown in this paper.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2020-0122/

High power rotating machinery requires large diameter bearings that can perform under extreme conditions. Vibrations and critical speeds of rotor supported by tilting pad journal bearing (TPJBs) exceeding their design limits may cause unit failure. This paper aims to investigate the experimental technique for large diameter bearings.

To obtain the experimental support for rotor-bearing system design, an experiment focusing on vibration monitoring is given. The sensors arrangement, monitoring system and critical speed identification method are provided.

By using test bench in factory unit, a large amount of vibrations data of different working situations is obtained. In addition, a method named non-excitation identification for critical speed is proposed. The critical speed of rotor identified through vibration data is given. The theoretical calculation results are also presented.

The basis for rotor-bearing system design can be obtained through comparisons between the experimental results and the theoretical calculation data.

The purpose of this paper is to analyze the problems of tilting-pad thrust bearing static instability and lubrication performance under static bistability.

The static equilibrium state of tilting-pad thrust bearing is analyzed, and key parameters are extracted from the general lubrication model. Then, a distribution area of bearing static equilibrium points is achieved by solving the model. The area is divided into three sub-areas which represent monostabillity, bistability and instability, and an unstable boundary of the area is discovered. By these findings, a reversible lubrication failure phenomenon is explained. A calculation method is proposed to obtain bearing lubrication performance under the bistability.

The variation of working conditions can lead to migration of unstable boundary and static instability. After resuming the working conditions, unstable boundary will resume in situ, and the bearing will operate steadily again. Moreover, there is a big difference between the two groups of lubrication performance solutions under the bistability.

The static stability acceptance test of tilting-pad thrust bearing should be implemented under start–stop, accidental excitation and other conditions before service to prevent such lubrication failure phenomenon. Moreover, fulcrum position of the bearing pad should be kept away from the bistable area.

This paper has preliminarily revealed a static instability mechanism of tilting-pad thrust bearing, analyzed bistability lubrication performance and proposed some suggestions to improve the bearing stability.

Honey peaches are rich in a variety of vitamins and are well known in China as the queen of fruit. However, as highly climacteric fruit, peach is too easy to affect its economic value. In this paper, a new passive modified atmosphere packaging system was proposed to solve the lack of water vapour removal capacity – which is still the technical bottleneck of passive modified atmosphere packaging. This paper aims to address this issue.

Under the conditions of relative humidity 85−90% and temperature 28°C−38°C, the influence of new passive modified atmosphere packaging on the shelf life and quality of 70% ripe peaches was studied in the paper. The effect of the new passive modified atmosphere packaging (PMAP) on fruit appearance, colour, taste, flavour, soluble solids, Vitamin C and titratable acid was investigated.

Regardless of whether 1-Methylcyclopropene is added or not, the research results show that the new PMAP has a significant effect on extending the shelf life and maintaining the quality of peaches. Compared with the control group, the shelf life of peaches treated with modified atmosphere packaging and 1-Methylcyclopropene was prolonged by 7 and 11 days, increasing the retailer's revenue by 44 and 75%.

A new integrated structure, which is composed of two types of films with high oxygen and high water vapour permeability was designed for the retail of peaches at room temperature. The former was mainly responsible for regulating the concentration of O₂ and CO₂, while the latter was for removing water vapour and regulating the relative humidity in PMAP.

This article examines the impact of different policy instruments on livestock farmers' willingness to recycle manure. The results shed light on the optimal policy combination.

A game theoretical framework is constructed to illustrate farmers' optimal strategies under different policies. Theoretical results are empirically tested by survey data from beef cattle farmers in Central China.

Empirical results show that penalties work better than subsidies if each type of policy is implemented separately. The authors also find a positive interaction between subsidy and penalty policies, suggesting that a combination of subsidy and penalty policies produces the best outcome in incentivizing livestock farmers to recycle manure. Furthermore, planting and breeding simultaneously have the strongest effect on increasing livestock farmers' willingness to recycle manure, suggesting that the combination of planting and breeding can be an optimal strategy for manure management.

This study is based on firsthand survey data and provides new evidence on the effectiveness of alternative environmental policies on manure recycling.

The purpose of this work is to controllably synthesize a carbon aerogel with programmable functionally graded performance via a simple and effective strategy.

This work uses polyvinyl alcohol (PVA) via the controllable sol-gel, lyophilization, and carbonization approach to achieve a programmable carbon aerogel. This design has the advantages of low raw material and preparation cost, simple and controllable synthetic process and low carbonization temperature.

The thermal stability and microstructure of PVA aerogel can be controlled by the crosslinking agent content within a certain range. The crosslinking agent content and the carbonization temperature are the key factors for functionally graded programming of carbon aerogels, including microstructure, oxygen-containing functional groups and adsorption performance. The adsorption ratio and adsorption rate of uranium can be controlled by adjusting initial concentration and pH value of the uranium solution. The 2.5%25 carbon aerogel with carbonization temperature of 350 °C has excellent adsorption performance when the initial concentration of uranium solution is 32 ppm at pH 7.5.

As a new type of lightweight nano-porous amorphous carbon material, this carbon aerogel has many excellent properties.

This work presents a simple, low cost and controllable strategy for functionally graded programming of novel carbon aerogel. This carbon aerogel has great potential for application in various fields such as uranium recovery, wastewater treatment, sound absorption and shock absorption.

The dissemination of misleading and false information through media can jeopardize a company’s reputation, thus posing a threat to its stock and performance. Institutional investors are known to influence capital markets. Therefore, this paper investigates whether institutional investors engage in shaping the media sentiment stock nexus, stabilize company stocks and enhance performance.

We first investigate the effect of media sentiment on market reactions by using panel regression models. To examine the role of institutional investors, we design a quasi-experiment by exploiting the Financial Crisis of 2008 and go further by examining the heterogeneity across levels of institutional ownership. Due to risk-averse, investors may respond asymmetrically to pessimistic and positive sentiment. Accordingly, we split the sample into two sub-types, good news and bad news, based on keywords representing positive or negative content.

We find supportive evidence that institutional investors have impacts on how the markets react to media news, and the impacts are heterogeneous in the face of bad and good news. We conjecture that institutional investors act as a stabilizer of stock prices through media sentiment management.

This paper confirms the distinctive effects of institutional investors on capital markets, and uncovers the behind-the-scenes intervention and possible causal link running from institutional investors to media sentiment management. It contributes to the broad field of institutional investors' behavior, media news involvement in capital markets and market efficiency.

The purpose of this paper is to critically assesses the major contributions to the academic literature on China’s increased focus on Africa, from 2001 to 2011. It discusses the key trends concerning China’s presence in Africa and draws conclusions on the significance of the studies by emphasizing and contrasting the prevailing positions.

Based on a qualitative approach using an integrative and comprehensive literature review, the authors performed a content analysis of high-impact, peer-reviewed papers.

The paper questions and repositions some of the existing controversies. The results from existing studies remain questionable, requiring further clarification and more theoretical backing. It, moreover, highlights the notion that behind the explicit neutrality views of China’s presence in Africa, implicit assumptions may exist. These are often the differences in narratives conveyed by Western and Southern stakeholders.

Most of the conclusions drawn from this paper need to be re-explored and supported by additional research. This could be done by widening the scope of the analysis. Studies need to provide more empirical support for their assertions through quantitative data and evidence-based qualitative analyses

all within a framework that considers more cultural, social and historical dimensions. The paper also suggests that an institutionally based view appears most relevant in better explaining China in Africa.

This paper reviews a decade of research on China in Africa and presents a snapshot of the current state of knowledge. It also raises concerns to be analyzed by future research and proposes new avenues for better understanding China’s presence in Africa.

The purpose of this paper is to explore the emergence of civil disobedience (CD) movements in Hong Kong in the context of the notion of civil society (CS).

The paper begins by rigorously defining the notion of CD, as well as the concept of CS and tracing its development in Hong Kong over the past several decades. By using a model of CS typology, which combines the variables of state control and a society’s quest for autonomy (SQA), the paper aims to outline the historical development of CD movements in Hong Kong. It also discusses the recent evolution of CS and its relationship with CD movements, particularly focusing on their development since Leung Chun-ying became the Chief Executive in 2012. Finally, by using five cases of CD witnessed in the past several decades, the relationship between the development of CS and the emergence of CD in Hong Kong has been outlined.

Four implications can be concluded: first, CD cannot emerge when the state and society are isolated. Second, the level of SC and the scale of CD are positively related. Third, as an historical trend, the development of SQA is generally in linear progress; SQA starts from a low level (e.g. interest-based and welfare-based aims) and moves upwards to campaign for higher goals of civil and political autonomy. If the lower level of SQA is not satisfied, it can lead to larger scale CD in future. Fourth, the CD movement would be largest in scale when the state-society relationship confrontational and when major cleavages can be found within CS itself.

This paper serves to enrich knowledge in the fields of politics and sociology.